Tork Basic Paper 1 Ply
  • Tork Basic Paper 1 Ply
  • Tork Basic Paper 1 Ply
127103

Tork Basic Paper 1 Ply

Tork Basic Paper 1 Ply
  • Tork Basic Paper 1 Ply
  • Tork Basic Paper 1 Ply

Description

The Tork Basic Paper 1 Ply is ideal for basic wiping tasks, hand wiping and when cost efficiency is important. This paper can be used in either the Tork Floor or Wall Stand dispensers, which are developed for safety, efficiency and reliability with their easy load and tear off features and the possibility to take paper needed with only one hand.
  • High capacity roll lasts longer and saves time on refilling
SA-COC-008266 FSC Recycled21LD04644 Food contact approved certified by a third partySE/004/001 EU Ecolabel

Product and delivery data

System
W1 - Wipers wall/floor/standard system
Quality
Universal
Roll length
1190 m
Roll width
23.5 cm
Roll diameter
38 cm
Core inner diameter
7.1 cm
Ply
1
Print
No
Embossing
No
Colour
Yellow

Delivery data

Consumer units
Transport units
(CON)
(TRP)
EAN
7322540069648
7310791057132
Packaging material
none
Shrink
Pieces
1
2 (2 CON)
Gross weight
7175.9 g
14.4 kg
Height
235 mm
235 mm
Length
380 mm
760 mm
Width
380 mm
380 mm
Net weight
7131.1 g
14.3 kg
Volume
33.93 dm3
67.87 dm3
Consumer units
(PAL)
EAN
7322540069648
Packaging material
none
Pieces
1
Gross weight
7175.9 g
Height
235 mm
Length
380 mm
Width
380 mm
Net weight
7131.1 g
Volume
33.93 dm3
Transport units
(TRP)
EAN
7310791057132
Packaging material
Shrink
Pieces
2 (2 CON)
Gross weight
14.4 kg
Height
235 mm
Length
760 mm
Width
380 mm
Net weight
14.3 kg
Volume
67.87 dm3

Content

The product is made from

Recycled fibres
Chemicals

The packaging material is made from paper or plastic.

Material

Recycled fibres

Recycling of paper is an efficient use of resources as the wood fibres are used more than once.

High demands are put on quality and purity of recovered paper, considering each step of the chain (collecting, sorting, transporting, storage, use), to ensure safe and hygienic products.

Recycled fibres can be produced from different types of recovered paper, such as collected newsprint, magazines, office waste, paper cups, drink cartons, corrugated boxes and paper hand towels. The choice of recovered paper grades is made for each product, depending on its specific requirements on performance properties and brightness. The paper is dissolved in water, washed and treated with chemicals under high temperature and screened to separate out impurities.

Bleaching of pulp, used for tissue, is primarily a process to remove substances that could have a negative effect on important properties of the finished product such as purity, absorption, strength and colour of the pulp.

Bleaching of the recycled fibre pulp is done using chlorine-free bleaching agents (hydrogen peroxide and sodium dithionite). Some of our products are bleached and some are not.

For bleached products we use bleaching agents (to increase the brightness of pulp from recovered paper).

Chemicals

All chemicals (process aids as well as additives) are assessed from an environmental, occupational health and safety and product safety point of view.

To control product performance we use additives:

  • Wet strength agents (for Wipers and Hand Towels)
  • Dry strength agents (are used together with mechanical treatment of the pulp to make strong products like wipers)
  • For coloured papers dyes and fixatives (to secure perfect fastness of the colour) are added
  • For printed products printing inks (pigments with carriers and fixatives) are applied
  • For multi ply products we often use water soluble glue to secure the intregrity of the product

In most of our mills we do not add optical brighteners but it often occurs in recovered paper since it is used in printing paper.

We do not use softeners for professional hygiene products.

High product quality is secured through quality and hygiene management systems throughout production, storage and transport.

In order to maintain a stable process and product quality the paper manufacturing process is supported by the following chemicals/ process aids:

  • defoamers (surfactants and dispersing agents)
  • pH-control (sodium hydroxide and sulphuric acid)
  • retention aids (chemicals that help to agglomerate small fibres to prevent fibre loss)
  • Coating chemicals (that help to control the creping of the paper to make it soft and absorbent)

To reuse broke and to utilise recovered fibres we use:

  • Pulping aid (chemicals that help to repulp wet strong paper)
  • Flocculation chemicals (that help to clean out printing inks and fillers from recovered paper)
  • Bleaching agents (to increase the brightness of pulp from recovered paper)

In the cleaning of our waste water we use flocculation agents and nutritients for the biological treatment to secure that no negative impact on water quality comes from our mills.

Food Contact

This product fulfills the legislative requirements for Food Contact materials, confirmed by external certification performed by a third party. The product is safe for wiping food contact surfaces and may also come occasionally into contact with foodstuffs for a short period of time.

Environmental certification

This product is certified with the EU Ecolabel with certificate number SE/004/001.

This product is certified for FSC® with certificate number SA-COC-008266.

Packaging

Fulfilment of Packaging and Packaging Waste Directive (94/62/EC): Yes

Article creation date and latest article revision

Date of issue: 19-04-2019
Revision date: 15-03-2024

Production

This product is produced at Lilla Edet mill, SE and certified according to ISO 9001, ISO 14001 (Environmental management systems), ISO 45001, ISO 50001 and FSC Chain-Of-Custody.

Essity UK Ltd, Southfields Road, Dunstable, Bedfordshire LU6 3EJ, United Kingdom