Tork Wiping Paper

  • Tork Wiping Paper
  • Tork Wiping Paper

Article: 130100

Colour: White

EAN: 7310791200880

Quality level: Advanced

Format: Roll

The 1-ply multipurpose Tork Wiping Paper Plus is ideal for light wiping tasks and hand wiping. This paper can be used in either the Tork Floor or Wall Stand dispensers, which are developed for safety, efficiency and reliability with their easy load and tear off features and the possibility to take paper needed with only one hand.

  • High capacity roll lasts longer and saves time on refilling
  • Particularly good for cleaning glass - does not leave any traces on the surface.
Read more Read less

Product certificates

EU Ecolabel SE/004/001
EU Ecolabel SE/004/001
Food contact approved 42872 U 16
Food contact approved 42872 U 16


Product data

SystemW1 - Wipers wall/floor/stand system
Roll Length1000 m
Roll Width24.5 cm
Roll Diameter38 cm
Core Inner Diameter7.1 cm
Ply1
PrintNo
EmbossingNo
ColourWhite

Shipping data

Consumer unit

EAN7310791200880
Pieces1
Height245 mm
Width380 mm
Length380 mm
Volume35.4 dm3
Net weight6370 g
Gross weight6510 g
Packing materialnone

Transport unit

EAN7310791200880
Pieces1
Consumer units1
Height245 mm
Width380 mm
Length380 mm
Volume35.4 dm3
Net weight6.4 kg
Gross weight6.6 kg
Packing materialShrink

Pallet

EAN7322540252163
Pieces42
Consumer units42
Transport unit42
Height1865 mm
Width800 mm
Length1200 mm
Volume1.5 m3
Net weight267.54 kg
Gross weight275.73 kg

Environmental info

Content

The product is made from

Virgin pulp

Recycled fibers

Chemicals

The packaging material is made from paper or plastic.

Material

Virgin fibers and recovered paper

In the tissue process both virgin fibers and recovered paper are being used. The choice of pulp is made based on product requirements and pulp availability so the pulp is used in the most efficient way.

The environmental benefits and economic feasibility of recovered paper as a raw material source depend on its availability, transport distance and the quality of the collected material.

Recycling of paper is an efficient use of resources as the wood fibers are used more than once.

High demands are put on quality and purity of recovered fibers, considering each step of the chain (collection, sorting, transportation, storage, use), to ensure safe and hygienic products.

Recovered paper can be produced both from collected newsprint, magazines and office waste. The choice of recovered paper grades, is made for each product, depending on its specific requirements on performance properties and brightness. The paper is dissolved in water, washed and treated with chemicals under high temperature and screened to separate out impurities.

Virgin pulp fibers are produced out of softwood or hardwood. The wood is subject to chemical and/or mechanical processes wehre the cellulose fibers are separated out and lignin and other residuals are removed.

Bleaching is a cleaning process of the fibers and the aim is to achieve a bright pulp, but also to get a certain purity of the fiber in order to achieve the demands for hygiene products and in some cases to meet the requirements for food safety.

There are different methods used today for bleaching: ECF (elementary chlorine free, where chlorine dioxide is used, and TCF (totally chlorine free) where ozone, oxygen and hydrogen peroxide is used.

Bleaching of the recovered pulp is made with chlorine-free bleaching agents (hydrogene peroxide and sodium dithionite).

Chemicals

All chemicals (process aids as well as additives) are assessed from an environmental, occupational health and safety and product safety point of view.

To control product performance we use additives:

  • Wet strength agents (for Wipers and Hand Towels)
  • Dry strength agents (is used together with mechanical treatment of the pulp to make strong products like wipers)
  • For colored papers dyes and fixatives (to secure perfect fastness of the color) are added
  • For printed products printing inks (pigments with carriers and fixatives) are applied
  • For multi ply products we often use a water soluble glue to secure the integrity of the product

In most of our mills we do not add optical brighteners but it often occurs in recovered paper since it is used in printing paper.

We do not use softeners for professional hygiene products.

High product quality is secured through quality and hygiene management systems throughout production, storage and transport.

In order to maintain a stable process and product quality the paper manufacturing process is supported by the following chemicals/ process aids:

  • defoamers (surfactants and dispersing agents)
  • pH-control (sodium hydroxide and sulphuric acid)
  • retention aids (chemicals that help to agglomerate small fibers to prevent fiber loss)
  • Coating chemicals (that help to control the creping of the paper to make it soft and absorbent)

To reuse broke and to utilize recovered fibers we use:

  • Pulping aid (chemicals that help to repulp wet strong paper)
  • Flocculation chemicals (that help to clean out printing inks and fillers from recovered paper)
  • Bleaching agents (to increase the brightness of pulp from recovered paper)

In the cleaning of our waste water we use flocculation agents and nutritients for the biological treatment to secure that no negative impact on water quality comes from our mills.

Food Contact

This product fulfills the legislative requirements for Food Contact materials, confirmed by external certification performed by a third party.  The product is safe for wiping food contact surfaces and may also come occasionally into contact with foodstuffs for a short period of time.

Environmental labels

This product is approved for the EU Ecolabel.

Packaging

Fulfilment of Packaging and Packaging Waste Directive (94/62/EC): Yes

Article creation date and latest article revision

Date of issue: 2015-07-22

Revision date: 2017-11-01

Production

This product is produced at LILLA EDET mill, SE and certified according to ISO 14001 (Environmental management systems), and ISO 9001.

Destruction

This product is used both for personal hygiene and for industrial processes. When used in industrial processes the product might through use be contaminated with different substances. This will determine how the used product will be handled / disposed of /destructed. The product itself is suitable for incineration. If used in industrial processes contact local authorities before destruction. When used for personal hygiene it can be collected together with household waste.

SCA Hygiene Products AB, 405 03 GÖTEBORG, Sweden

Choose a dispenser

Image
Products
Article number
Colour

Tork Floor Stand

Article number 652000

Tork Floor Stand

Article number 652008

Tork Wall Stand

Article number 652100

Tork Wall Stand

Article number 652108

Alternative products

  • Tork Wiping Paper Plus

    130045

  • Tork Heavy-Duty Wiping Paper

    130070

  • Tork Industrial Heavy-Duty Wiping Paper

    130080

  • Tork Industrial Cleaning Cloth

    520304

  • Tork Heavy-Duty Cleaning Cloth

    530104

Others who looked at Wipers and cloths products also looked at

Category_illustrations

Napkins and tableware

Table top products that set the scene and create atmosphere
Category_illustrations

Sanitiser

Sanitisers for hygienic hands in office, food service, and healthcare environments
Category_illustrations

Waste & sanitary bins

Range of matching waste and sanitary bins to complete your washroom

Centrefeed

Versatile centrefeed rolls for multi-purpose wiping and hand drying